1986-1987 Buick Turbo Regal -
TR-6 HIGH TECH IGNITION SYSTEM
This is the complete kit including the custom grey plug wires, late model GM coil module, and upgraded TR 6 module. Detailed instructions are also provided with each kit.
This is a higher than the stock power ignition system. It requires a 25A fuse in the CCC1 fuse to handle the increased current flow. The stock wiring is adequate to handle the increased current flow.
This kit is built by Bailey Engineering, who has many years in developing the various products we offer for ignition systems for the 1986-1987 Turbo Regals.
You can set the Rev Limit with this kit.
The unit mounts in the stock location. It is a heavy die-cast powder-coated aluminum enclosure. It has an Advanced 32bit microprocessor. It includes a built in 2-step Launch Control System and can be ran in either wastepark or sequential firing.
Safety mode shuts down the engine if unsafe signals or sensors are detected.
Fully plug-and-play with the stock vehicle harness.
This is a must have upgraded ignition system if you are making modifications to the stock format.
NOTE - Due to the complexity of this system, we recommended it be installed by a qualified mechanic. NOTE - You may also be interested in these related parts - #7723 CCCI (Computer Controlled Coil Ignition) SensorCheck Module, #7200 E3 Spark Plugs (6) Set, and #6803 GM Spark Plug Wire Holders (5) Set.
An excellent upgrade to the ignition system.
7961 - 1986-1987 Buick Turbo Regal - TR-6 High Tech Ignition System (includes custom coil module, late model GM ignition coil, and grey spark plug wire set)
1986-1987 Buick Turbo Regal -
TR-6 HIGH TECH IGNITION SYSTEM
This is the complete kit including the custom grey plug wires, late model GM coil module, and upgraded TR 6 module. Detailed instructions are also provided with each kit.
This is a higher than the stock power ignition system. It requires a 25A fuse in the CCC1 fuse to handle the increased current flow. The stock wiring is adequate to handle the increased current flow.
This kit is built by Bailey Engineering, who has many years in developing the various products we offer for ignition systems for the 1986-1987 Turbo Regals.
You can set the Rev Limit with this kit.
The unit mounts in the stock location. It is a heavy die-cast powder-coated aluminum enclosure. It has an Advanced 32bit microprocessor. It includes a built in 2-step Launch Control System and can be ran in either wastepark or sequential firing.
Safety mode shuts down the engine if unsafe signals or sensors are detected.
Fully plug-and-play with the stock vehicle harness.
This is a must have upgraded ignition system if you are making modifications to the stock format.
NOTE - Due to the complexity of this system, we recommended it be installed by a qualified mechanic. NOTE - You may also be interested in these related parts - #7723 CCCI (Computer Controlled Coil Ignition) SensorCheck Module, #7200 E3 Spark Plugs (6) Set, and #6803 GM Spark Plug Wire Holders (5) Set.
An excellent upgrade to the ignition system.
7961 - 1986-1987 Buick Turbo Regal - TR-6 High Tech Ignition System (includes custom coil module, late model GM ignition coil, and grey spark plug wire set)
