1979-1987 Buick Regal (Including Turbo Models) - STAINLESS BRAIDED BRAKE HOSES (3) SET Because the Turbo Regals are now over 30 years old, one of the overlooked areas for replacement are the factory original flexible brake hoses. They can swell up when you apply the brakes and eventually the hoses may split. Swelling can also be attributed to a softer brake pedal. As any car restorer can tell you, one of the best upgrades you can make to the brake system is to replace the factory flexible rubber-like brake hoses with stainless braided hoses. We offer this complete set, which includes a hose for each front wheel and the hose that connects the back lines by the top rear axle housing. The hoses carry the DOT label. Once installed, the end result, with no other changes, is a slightly harder pedal. It restores confidence when depressing the brake pedal. We also recommend a fresh brake flush at the same time you replace these hoses. This set will fit 1979-1987 Buick Regals, including the Turbo Regal. #7698 GM Brake Drum Hardware (26) Kit, #7021 Rebuilt Powermaster Brake Unit, #7189 Reproduction Brake Proportioning Valve, #7459 Reproduction Complete Brake Lines (7) Kit, #7189 Reproduction Brake Proportioning Valve, #7916 Reproduction Vacuum Brake Pedal, and #7459 Reproduction Complete Brake Lines (7) Kit. 7218 - 1979-1987 Buick Regal (Including Turbo Models) - Stainless Braided Brake Hoses (3) Set
1979-1987 Buick Regal (Including Turbo Models) - STAINLESS BRAIDED BRAKE HOSES (3) SET Because the Turbo Regals are now over 30 years old, one of the overlooked areas for replacement are the factory original flexible brake hoses. They can swell up when you apply the brakes and eventually the hoses may split. Swelling can also be attributed to a softer brake pedal. As any car restorer can tell you, one of the best upgrades you can make to the brake system is to replace the factory flexible rubber-like brake hoses with stainless braided hoses. We offer this complete set, which includes a hose for each front wheel and the hose that connects the back lines by the top rear axle housing. The hoses carry the DOT label. Once installed, the end result, with no other changes, is a slightly harder pedal. It restores confidence when depressing the brake pedal. We also recommend a fresh brake flush at the same time you replace these hoses. This set will fit 1979-1987 Buick Regals, including the Turbo Regal. #7698 GM Brake Drum Hardware (26) Kit, #7021 Rebuilt Powermaster Brake Unit, #7189 Reproduction Brake Proportioning Valve, #7459 Reproduction Complete Brake Lines (7) Kit, #7189 Reproduction Brake Proportioning Valve, #7916 Reproduction Vacuum Brake Pedal, and #7459 Reproduction Complete Brake Lines (7) Kit. 7218 - 1979-1987 Buick Regal (Including Turbo Models) - Stainless Braided Brake Hoses (3) Set
