1984-1987 Buick Turbo Regal - RJC HEAVY-DUTY REAR MOTOR BRACE This heavy-duty rear motor brace is custom made by RJC Racing, home of the 2002-2003-2004 GS Nationals TSM Class Winner. The brace was designed and manufactured by Jason in billet steel, and then powder coated black. The unique design allows the load of the motor to be on the rear of the engine, instead of the narrowest point by the engine mounts. It is designed to support the block in high HP applications and to help the motor stay in place during hard acceleration and high-load situations. This simple device bolts into existing holes. It is very effective and does not transmit vibration into the driver's/passenger side compartment. In an extreme test, they used a Turbo Regal with bad motor mounts. With 2 lbs of boost, the motor shifted by about 4 inches. With no other changes (other than installing this adjustable rear motor brace) at 10 lbs of boost, the motor barely moved a 1/4 of an inch. There is no vibration felt with this system, because of the rubber snubber at the one point. It is totally adjustable, so you can make it even stiffer for race conditions yet be totally streetable. This rear motor brace will also cut down on false knock sensor readings and puts less stress on the factory engine mounts. Since it is powder coated black, it will not rust. This 1984-1987 Turbo Regal rear motor brace comes with all the necessary hardware and instructions. The brace attaches to the bell housing on the driver's side, using the longer bolts and adjustable snubber (supplied with the brace.) It rests against the bottom part of the frame as shown in Photo B. Photo C shows how the rear motor brace bolts to the bell housing. NOTE - This is the heavy-duty version, not to be confused with the earlier RJC rear motor brace we used to sell. NOTE - If you are interested in this part, you may also want to consider Part #6891 Engine Mounts (2), or #6941 Rear Transmission Mount. An excellent upgrade to cure the problem of engine movement under acceleration. 7592 - 1984-1987 Buick Turbo Regal - RJC Heavy-Duty Rear Motor Brace
1984-1987 Buick Turbo Regal - RJC HEAVY-DUTY REAR MOTOR BRACE This heavy-duty rear motor brace is custom made by RJC Racing, home of the 2002-2003-2004 GS Nationals TSM Class Winner. The brace was designed and manufactured by Jason in billet steel, and then powder coated black. The unique design allows the load of the motor to be on the rear of the engine, instead of the narrowest point by the engine mounts. It is designed to support the block in high HP applications and to help the motor stay in place during hard acceleration and high-load situations. This simple device bolts into existing holes. It is very effective and does not transmit vibration into the driver's/passenger side compartment. In an extreme test, they used a Turbo Regal with bad motor mounts. With 2 lbs of boost, the motor shifted by about 4 inches. With no other changes (other than installing this adjustable rear motor brace) at 10 lbs of boost, the motor barely moved a 1/4 of an inch. There is no vibration felt with this system, because of the rubber snubber at the one point. It is totally adjustable, so you can make it even stiffer for race conditions yet be totally streetable. This rear motor brace will also cut down on false knock sensor readings and puts less stress on the factory engine mounts. Since it is powder coated black, it will not rust. This 1984-1987 Turbo Regal rear motor brace comes with all the necessary hardware and instructions. The brace attaches to the bell housing on the driver's side, using the longer bolts and adjustable snubber (supplied with the brace.) It rests against the bottom part of the frame as shown in Photo B. Photo C shows how the rear motor brace bolts to the bell housing. NOTE - This is the heavy-duty version, not to be confused with the earlier RJC rear motor brace we used to sell. NOTE - If you are interested in this part, you may also want to consider Part #6891 Engine Mounts (2), or #6941 Rear Transmission Mount. An excellent upgrade to cure the problem of engine movement under acceleration. 7592 - 1984-1987 Buick Turbo Regal - RJC Heavy-Duty Rear Motor Brace
