For the serious racer who wants every available advantage. These are made from the same bumper molds we used to sell over 35 years ago.
These are for the serious racer and not designed for street use since they offer very little protection in case of an accident.
Bumper is done in black gelcoat and would need to be prepped, sanded and painted. They come in black gel coat, straight out of the mold.
Mold was fully prepped and eliminated the rubber cushion completely. Bumpers have a smooth front since the rubber cushion was completely eliminated. Bumpers have fiberglass brackets on the back side that are slotted for adjustments to attach just like the original bumpers.
The fiberglass rear bumper weighs less than 10 pounds. The stock steel rear bumper weighs as much as 45 pounds depending on whether it has a steel or aluminum reinforcement brace. You can shed as much as 35 pounds with this fiberglass rear bumper.
We have a special price if you buy both fiberglass bumpers at the same time.
NOTE - Our bumpers are for OFF ROAD USE ONLY! They are NOT made to withstand any collision! NOT LEGAL FOR STREET USE!
NOTE - We recommend these bumpers be installed by a qualified autobody shop. Bumper should be sanded, prepped and painted.
Easy to install.
NOTE - This is an excellent time to also replace the Front Bumper Filler Panels #7438 and Rear Bumper Filler Panels #7439, if they are cracked. You may also be interested in these related parts - #7507 Reproduction "AMBER" Signal Lamps (2) and #7917 Tinted Parking Light Covers (2).
Another excellent replacement for any exterior restoration.
NOTE - Here are the 3 options for ordering these bumpers. We have highlighted in RED the one you are ordering if you order through this particular page.
For the serious racer who wants every available advantage. These are made from the same bumper molds we used to sell over 35 years ago.
These are for the serious racer and not designed for street use since they offer very little protection in case of an accident.
Bumper is done in black gelcoat and would need to be prepped, sanded and painted. They come in black gel coat, straight out of the mold.
Mold was fully prepped and eliminated the rubber cushion completely. Bumpers have a smooth front since the rubber cushion was completely eliminated. Bumpers have fiberglass brackets on the back side that are slotted for adjustments to attach just like the original bumpers.
The fiberglass rear bumper weighs less than 10 pounds. The stock steel rear bumper weighs as much as 45 pounds depending on whether it has a steel or aluminum reinforcement brace. You can shed as much as 35 pounds with this fiberglass rear bumper.
We have a special price if you buy both fiberglass bumpers at the same time.
NOTE - Our bumpers are for OFF ROAD USE ONLY! They are NOT made to withstand any collision! NOT LEGAL FOR STREET USE!
NOTE - We recommend these bumpers be installed by a qualified autobody shop. Bumper should be sanded, prepped and painted.
Easy to install.
NOTE - This is an excellent time to also replace the Front Bumper Filler Panels #7438 and Rear Bumper Filler Panels #7439, if they are cracked. You may also be interested in these related parts - #7507 Reproduction "AMBER" Signal Lamps (2) and #7917 Tinted Parking Light Covers (2).
Another excellent replacement for any exterior restoration.
NOTE - Here are the 3 options for ordering these bumpers. We have highlighted in RED the one you are ordering if you order through this particular page.
