1986-1987 Turbo Regal & 1989 Turbo Trans Am -
REPLACEMENT HEAVY-DUTY PCV VALVE
Another low cost maintenance item... In researching this item, we found the PCV valve used on the 1986-1987 Turbo Regals is unique for those years only. This makes it difficult to buy this PCV valve over the counter at most auto parts stores.
With the high levels of boost associated with the 1986-1987 Turbo Regal, this is a nice upgrade to replace the original PCV valve. It is made by RJC Racing.
This new PCV valve is machined from billet brass hex stock. It replaces the stock PCV valve and is 100% interchangeable with the factory PCV grommet and the factory vacuum hose currently in your system.
It opens in less than 1 inch of vacuum and is rated over 2,000 psi pressure strength. Its self-lubricating viton seals will last forever and will never need replacing.
The Buick Owner's Manual recommends the PCV valve be replaced every 30,000 miles or if you notice it is clogged. Because it's so important for these motors to breathe properly and the cost of this items is so reasonable, we recommend you replace the PCV valve with this heavy-duty PCV valve, which will never need to be replaced.
7302 - 1986-1987 Turbo Regal & 1989 Turbo Trans Am -
Replacement Heavy-Duty PCV Valve
1986-1987 Turbo Regal & 1989 Turbo Trans Am -
REPLACEMENT HEAVY-DUTY PCV VALVE
Another low cost maintenance item... In researching this item, we found the PCV valve used on the 1986-1987 Turbo Regals is unique for those years only. This makes it difficult to buy this PCV valve over the counter at most auto parts stores.
With the high levels of boost associated with the 1986-1987 Turbo Regal, this is a nice upgrade to replace the original PCV valve. It is made by RJC Racing.
This new PCV valve is machined from billet brass hex stock. It replaces the stock PCV valve and is 100% interchangeable with the factory PCV grommet and the factory vacuum hose currently in your system.
It opens in less than 1 inch of vacuum and is rated over 2,000 psi pressure strength. Its self-lubricating viton seals will last forever and will never need replacing.
The Buick Owner's Manual recommends the PCV valve be replaced every 30,000 miles or if you notice it is clogged. Because it's so important for these motors to breathe properly and the cost of this items is so reasonable, we recommend you replace the PCV valve with this heavy-duty PCV valve, which will never need to be replaced.
7302 - 1986-1987 Turbo Regal & 1989 Turbo Trans Am -
Replacement Heavy-Duty PCV Valve
