We carry custom-cut, high-performance plug wires with the special long spark plug boots. These are specially made for us in grey with black, heavy-duty spark plug boots, same color as the original plug wires. Each wire is the exact length as an original set! Our wire kit has the tight-grip neoprene nipples to insulate the coil connections to seal out the moisture. Heat-treated terminals always fit extra tight for maximum conductivity and are zinc plated to prevent corrosion. The Hi-Tech silicone boots protect the terminals from fuel, oil and intense engine heat. The wire covering is exceptionally resistant to heat temperature of 500 degrees and vibration. The rubber-like conductor over a glass core is for maximum tensile strength, 225 lb. test. The spiral core is tightly wound for protection against escaping frequencies.
Our wires are superior to the original wires. Fortunately we located a wire that is a similar grey to the stock wires for this custom-cut set, since they are NOT available from GM. If you order wires from GM, you'll receive black wires in a universal set. You can order individual plug wires from GM that are grey, but the boot is not the same length and that makes it difficult to install.
Most of the aftermarket companies use bright colored wires and are not custom-cut lengths for your car. Ours are stock looking and high quality. Keep an extra set on hand.
You may also be interested in these related parts - #7200 E3 SPARK PLUGS (6) SET, #7060 FEL-PRO VALVE COVER GASKETS (2), #6803 GM Factory Original SPARK PLUG WIRE HOLDERS (5) SET, #7637 AC Delco Coil Pack, and #7723 CCCI (Computer Controlled Coil Ignition) SensorCheck Module.
We carry custom-cut, high-performance plug wires with the special long spark plug boots. These are specially made for us in grey with black, heavy-duty spark plug boots, same color as the original plug wires. Each wire is the exact length as an original set! Our wire kit has the tight-grip neoprene nipples to insulate the coil connections to seal out the moisture. Heat-treated terminals always fit extra tight for maximum conductivity and are zinc plated to prevent corrosion. The Hi-Tech silicone boots protect the terminals from fuel, oil and intense engine heat. The wire covering is exceptionally resistant to heat temperature of 500 degrees and vibration. The rubber-like conductor over a glass core is for maximum tensile strength, 225 lb. test. The spiral core is tightly wound for protection against escaping frequencies.
Our wires are superior to the original wires. Fortunately we located a wire that is a similar grey to the stock wires for this custom-cut set, since they are NOT available from GM. If you order wires from GM, you'll receive black wires in a universal set. You can order individual plug wires from GM that are grey, but the boot is not the same length and that makes it difficult to install.
Most of the aftermarket companies use bright colored wires and are not custom-cut lengths for your car. Ours are stock looking and high quality. Keep an extra set on hand.
You may also be interested in these related parts - #7200 E3 SPARK PLUGS (6) SET, #7060 FEL-PRO VALVE COVER GASKETS (2), #6803 GM Factory Original SPARK PLUG WIRE HOLDERS (5) SET, #7637 AC Delco Coil Pack, and #7723 CCCI (Computer Controlled Coil Ignition) SensorCheck Module.
