1986-1987 Buick Turbo Regal - COLD CASE UPGRADED ALUMINUM RADIATOR Because of the age of these cars, the radiator has lost some of its efficiency. Also the factory core size is marginal at best. These upgraded radiators are 100% brand new, and made by COLD-CASE, a division of Max Performance, who also owns Pypes Exhaust. This new radiator is bare aluminum. It has two 1" tubes internally, which are bigger than stock. The core size is 1/4" wider and the end tanks are 1/4" wider. This radiator has undergone several months of testing by Nick Micale in his car in Arizona. The original radiator weighs 25.6 lbs, this radiator weighs 15.2 lbs. The overall weigh savings over the stock radiator is about 10 lbs. This upgraded radiator is designed so it fits exactly like the factory radiator and accepts all the factory original oil and transmission coolant fittings. The factory radiator cap will also fit this radiator. The stock radiator hose will fit. NOTE: We highly recommend installation be done by a qualified shop. Some modification to the rubber bushings is required to fit this Cold Case Radiator in the stock location. You still retain the metal top radiator plate. All the factory coolant lines use the same factory fittings. Our first photo shows this new upgraded aluminum radiator. Our other photos show a comparison views of an original radiator and this new aluminum radiator. NOTE - If you plan to paint the radiator, we highly recommend Eastwood's Radiator Black 12 oz Satin Finish, part #10340Z. A typical radiator requires 2 coats of paint. Normal engine paints are too thick for radiator use, which will interfere with heat transfer and block air flow over the cooling fins. Also, standard paint tends to flake off metal radiator tanks. The Radiator Black is specially formulated to solve these problems, will not interfere with heat transfer, and is heat resistant to 300°F. NOTE - You may also be interested in these related parts - #7948 COLD CASE Billet Radiator Cap, #6842 Reproduction Molded Lower Radiator Hose, #7269 Aftermarket Dayco Molded Upper Radiator Hose, #7772 Reproduction 3-Piece Baffles Set, #7206 Replacement Oil Coolant Lines (2) and O-rings (2), and #7811 Reproduction UPPER Radiator Insulators/Bushings (2). NOTE - Shipping cost is based on an oversized package. Another nice engine restoration item. 7457 - 1986-1987 Buick Turbo Regal - Cold Case Upgraded Aluminum Radiator
1986-1987 Buick Turbo Regal - COLD CASE UPGRADED ALUMINUM RADIATOR Because of the age of these cars, the radiator has lost some of its efficiency. Also the factory core size is marginal at best. These upgraded radiators are 100% brand new, and made by COLD-CASE, a division of Max Performance, who also owns Pypes Exhaust. This new radiator is bare aluminum. It has two 1" tubes internally, which are bigger than stock. The core size is 1/4" wider and the end tanks are 1/4" wider. This radiator has undergone several months of testing by Nick Micale in his car in Arizona. The original radiator weighs 25.6 lbs, this radiator weighs 15.2 lbs. The overall weigh savings over the stock radiator is about 10 lbs. This upgraded radiator is designed so it fits exactly like the factory radiator and accepts all the factory original oil and transmission coolant fittings. The factory radiator cap will also fit this radiator. The stock radiator hose will fit. NOTE: We highly recommend installation be done by a qualified shop. Some modification to the rubber bushings is required to fit this Cold Case Radiator in the stock location. You still retain the metal top radiator plate. All the factory coolant lines use the same factory fittings. Our first photo shows this new upgraded aluminum radiator. Our other photos show a comparison views of an original radiator and this new aluminum radiator. NOTE - If you plan to paint the radiator, we highly recommend Eastwood's Radiator Black 12 oz Satin Finish, part #10340Z. A typical radiator requires 2 coats of paint. Normal engine paints are too thick for radiator use, which will interfere with heat transfer and block air flow over the cooling fins. Also, standard paint tends to flake off metal radiator tanks. The Radiator Black is specially formulated to solve these problems, will not interfere with heat transfer, and is heat resistant to 300°F. NOTE - You may also be interested in these related parts - #7948 COLD CASE Billet Radiator Cap, #6842 Reproduction Molded Lower Radiator Hose, #7269 Aftermarket Dayco Molded Upper Radiator Hose, #7772 Reproduction 3-Piece Baffles Set, #7206 Replacement Oil Coolant Lines (2) and O-rings (2), and #7811 Reproduction UPPER Radiator Insulators/Bushings (2). NOTE - Shipping cost is based on an oversized package. Another nice engine restoration item. 7457 - 1986-1987 Buick Turbo Regal - Cold Case Upgraded Aluminum Radiator
