Greetings Turbo Regal Inner Circle Members 06-08-2016 -
RIP MUHAMMAD ALI -
Unless you live under a rock, you’ve heard that Muhammad Ali passed away late last week. His life touched so many people outside of the boxing ring that he is called one of the greatest Americans of our generation. I think this Friday most of Lousiville, Kentucky will virtually come to a standstill as he is laid to rest in the city where he was born. I remember him taking the stand on Vietnam and the draft, since that was the timeframe I was in Vietnam.
VIETNAM / 50 YEARS AGO / TURBO REGALS -
As strange as it may seem, there is actually a connection between the three topics in the above heading in my life. Ironically, I discovered this the day after Memorial Day, which is quite fitting.
As I have mentioned it before, I served one year (1966-1967) of my three-year Army stint in Nha Trang, Vietnam. I was lucky because when the plane landed in nearby Cam Ranh Bay, an officer addressed the group of us new recruits inquiring who had photography experience. Three of us raised our hands. We were tested, and I proved to be the chosen one.
Fortunately, I was a wedding photographer with my Dad at just 17 years old. Often times my Dad had two weddings on the same day, so I would cover one of the weddings by myself.
I was then sent up to Nha Trang to replace the current 17th Aviation Group photographer who had an unusual last name. His last name was Gogluicci. I remember he was from New Jersey. He had maybe one week left in Vietnam to train me, and then he was going back to the states. If I recall, he was shorter than me.
Fast forward to last Tuesday, the day after Memorial Day, I was carrying a stack of orders down to the packing area and the Turbo Regal order on top was for a Matt Gogluicci in New Jersey.
Like many Vets memories come back to you around Memorial Day and I was no exception. I called Matt Gogluicci and said, “I have an unusual question for you. Did any of your relatives with that last name serve as a photographer in Vietnam in 1966-1967 timeframe?” He said his father did and his father’s first name was Vincent.
I immediately thought this was too much of a coincidence. I had Matt give me his Dad’s phone number. Sure enough, it was Matt’s father that I replaced as a photographer for the 17th Aviation Group in Nha Trang Vietnam.
I also became the editor for the 17th Aviation Group newspaper.
It’s weird, both Vinny and I only recall one of our bosses, a young 1LT Heilderberg. The spelling of his name may be wrong.
We plan to get together later this summer. Vinny, as he was known, only has vague memories of me since going back to the States was his main concern at the time! I think he was headed for the states within 3-5 days of me arriving to replace him.
It turns out that Vinny landed the job the same way I did when he first got to Vietnam. He landed in Saigon and was also given a test. He was able to get developing equipment brought over by the Air Force, so we could develop black and white photos. In 1966-1967 in Vietnam we could not develop color prints.
Talk about a small world! Vinny is still a photographer today, which as many of you know has changed a lot from 50 years ago.
In Vietnam I used an expensive German camera called a “Rolleiflex.” Once I was given the job, my father sent me my own camera equipment, which I had used for weddings in the states. This camera shot 2-¼ inch negatives, which was larger than the standard 35mm film that most cameras used back then.
The military had a huge camera that I refused to use. I can’t remember what it was called.
I sold the Rolleiflex camera years ago. I can remember taking photos of General William Westmoreland standing maybe 10 feet away from me. At age 18, you don’t realize the history you are witnessing at the time.
I still have my short-timer’s stick from Vietnam. It was a wooden hand-carved small cane-like stick that you would carry. When they saw you with one of those sticks, other troops immediately would recognize that you were going home within a matter of weeks. I can’t recall if the short-timer’s stick was practiced all over Vietnam or just in my unit. Many of us short-timers even had it down to the number of hours before we left that dreadful country!
After serving in Vietnam, Vinny finished his Army tour in Georgia. I finished my tour at the Philadelphia Induction Center testing incoming recruits. Basically, I played teacher to incoming draftees. This was great duty as I got to drive home every night. At the time, my wife worked at Hurst.
I just took a quick glimpse on ebay and the Rolleiflex camera like I used is selling for anywhere from $1,500 to $5,000.
This story is proof that “It’s a small world after all.”
We plan to meet up with Vinny later this summer for dinner, something we never did in Vietnam!
MINT MATCHED SET OF GRAND NATIONAL WHEELS -
We recently purchased a set of mint 1986-1987 Grand National wheels from a long-time customer of ours that he removed over 15 years ago. (See Rare Parts section however, they may already be sold).
In checking the stampings on the back, two are dated 12-15-86 and two are dated 12-16-86. The owner made sure when he got the tires removed that they did it the proper way so as not to have the tire machine scratch the chrome surface. This was a common problem back when these cars were fairly new. I can recall selling many new sets of wheels to tire places that had ruined customer’s wheels and needed replacements. Back then not many cars had chrome steel wheels.
PHOTO 1 - Shows for photos of the mint, matched set of 1986-1987 Grand National wheels. It may not be readable but the date code is very visible on the back in one of the photos. Note how clean the backsides of the wheels are. I did not even have to polish the fronts, they are that nice.
POWERMASTER BRAKE SWITCHES -
As most Turbo Regal owners realize, back when the cars were fairly new, there was a Safety Recall issued by Buick for the General Electric brake switch.
From the factory they all received a black brake switch on the powermaster unit.
Soon after production, major issues developed with the brake switch possibly leaking. One might say that was the beginning of a long-running problem connected to the powermaster brake unit.
At this point, it is extremely rare that we get back a powermaster core that still has the black brake switch on it. From what I understand, a Safety Recall can basically be redeemed for free, regardless of the time limit. As long as no one has run your 17-digit VIN number at the Buick dealer and claimed the replacement grey brake switch, you should be able to get it at no charge.
I can remember doing this more than once in the early and mid-1990s on some of the Turbo Regals we bought to resell.
In April I had a customer bring me something at our Open House I had never seen before. As a NOS part it is worthless, but as a novelty item it ranks right up there as I never knew it existed in this packaging.
PHOTO 2 - The top left photo shows the original still sealed AC Delco bag that contains a brand new black brake switch, complete with a single O-ring. The top right photo taken is of the back of the bag clearly shows the black brake switch still sealed in the original AC Delco bag.
In all my years in business and with the deals I have done, I have never seen a black brake switch replacement still factory sealed in the AC Delco bag. Although its value may not be much, it’s a cool item for someone like me to have. On the left in the lower photo shows a used black brake switch that someone has loaded up with silicone, probably trying to stop a leak! On the right in the lower photo, of course, we show the correct replacement grey brake switch. That is the brake switch that should be on every powermaster unit today.
EXPLAINING THE SPID CODES (TRUNK ID LABEL) continued -
Relating to the SPID codes label, this is where all the factory installed options are listed in alphabetical order along with a list of the features that are in your Turbo Regal.
According to Chris Tobie, who worked at GM, other GM car lines started using the SPID labels prior to 1984 and they can be found on earlier F-body cars for example.
Everyone has their own preference for the number of options, whether the goal is to have as few as possible or trying to have as many as possible.
Looking back and I think many of my readers will agree they wish their Turbo Regal did not have certain options. Power windows and a power antenna can be quite problematic. The factory alarm can also cause issues. Those are just three that quickly come to my mind.
I remember when I got ours in the fall of 1987, it was a fairly well-optioned 1987 Grand National hardtop. At the time we also had a 1985 Mustang GT 5 speed with power windows. When it comes to power windows the Mustang was definitely quicker.
One of the most useful options that you can easily add to your 1984-1987 Turbo Regal today is the optional power trunk release. The SPID code for this option is “AU3” and it originally had a $50 price tag for 1984-1987. It was the same system that GM used on all the G-body cars.
For some reason GM mounted the release button on a bracket mounted in the glove box. This is a practice that GM has since discontinued. Years later they moved the button to the driver’s area. We had the actual bracket reproduced exactly. This is a very simple option to install, meaning even I have installed them in previous cars. One wire goes from the actual solenoid to one side of the button. This wire runs down the same way as the trunk light wire does. It would run down the driver’s side trunk hinge. Another wire comes off the other terminal on the back of the button and goes directly to a spot in the fuse box that has power to it when the car is turned off.
SPID codes will be continued next week.
PHOTO 3 - We show the three basic parts for the optional power trunk release. On this particular solenoid, I polished it up. It actually looks better than new.
One company that has purchased many of them from us is MIKE’S MONTES in Ohio. You can email him - [email protected] or call him at 1-800-811-5851 to purchase a power trunk release kit from him. His price is $49.95 plus shipping.
Mike is also a good source for many other Turbo Regal parts. I have known him personally for a number of years and, like most of the other G-body suppliers, we buy and sell to each other weekly. (See the Rare Parts section as the one shown in Photo 3 can be purchased directly from me).
PHOTO 4 - Shows the actual instruction sheet that came with the power trunk release kit, if you purchased it as an accessory for your car at a later date.
SEE NEW PRODUCTS SECTION -
See the New Products section for the 1984-1985 Turbo Regal conversion kit to a 1986-1987 Turbo Regal Ignition System. As many 1984-1985 owners are discovering, original 1984-1985 ignition setups are getting harder to find. Casper’s Electronics made a conversion kit that is plug-and-play and includes the bracket to secure the coil module. We now carry this complete kit.
REPRODUCTION GNX-STYLE DASH FOR SALE -
Complete pre-mounted GNX dash for sale. All of the cutting, fitting and alignment work is complete, just wire the dash and install the entire unit.
Kit Includes:
Applique with correct color indicators
Metal mounting plate
Plastic gauge bezel
Stock pre-cut cluster harness
Stock dash bezel (pre-cut with plastic gauge bezel attached)
New Stewart Warner speedometer with upper speedometer cable
New Stewart Warner tachometer
New Stewart Warner oil pressure gauge with sending unit
New Stewart Warner water temperature gauge with sending unit
New Stewart Warner fuel gauge
New Stewart Warner vacuum/ boost gauge
Plug-and-play harness
$2,250 plus shipping
This one was hand built by a good friend of ours who owns 3 Grand Nationals and has built several of these.
It comes with stock bezel already pre-cut so you do not have to cut your dash bezel. This kit eliminates any possible issues of trial and error since they have built several of these.
Buyer would have to inform us which dash is currently in the car - either digital or analog.
If interested, email me direct - [email protected] - I can provide photos.
CORES NEEDED -
Here is the information on our credits for cores.
We currently need original good 1986-1987 AC Delco mass air flow sensors. We allow $25 Letter of Credit for each correct AC Delco core.
URGENT NEED - TURBO CORES must be the 1986-1987 Turbo Regal stock ones. They must be complete. We will issue you a $100 Letter of Credit for each acceptable core.
If you ship to us, the post office is the cheapest method. Pack the item(s) with a note with your name, address and phone number
MAIL - Ship to Address -
ATTN - DENNIS
KIRBAN PERFORMANCE PRODUCTS
PO BOX 1199
PLUMSTEADSVILLE, PA 18949-1199
TECH CALLS -
If you need technical information, it’s best to email - [email protected] rather than call us.
We will do our best to answer any technical questions within 24 hours.
CAR FOR SALE - 1987 BUICK GRAND NATIONAL -
This is one with the optional factory astro-roof (CF5). It has undergone a complete frame off restoration. The seller has fully documented with photos in a binder. No expense has been spared. The owner even was able to use brand new original Pallex material. This is a top-notch example where no expense has been spared. Hundreds of hours went into the bodywork alone. All the glass and interior was totally removed. NOS GM parts were used when possible to make this car like new again. The motor was completely rebuilt and balanced. A new Limit Engineering TA 49 turbo was installed.
All new body mounts. NOS GM taillights and bezels were used along with a NOS GM grille. The bumpers were totally stripped with NOS front and rear bumper strips installed.
Here is a chance to own one completely redone and enjoy. The seller may take in partial trade another 1986-1987 Turbo Regal. The price is $39,500. This car is exactly as described, show quality from any angle, including underneath.
This Grand National is located about 20 miles from my shop. One of the best restorations you will find of a Grand National. For more info email me - [email protected]
CARS FOR SALE -
From time to time, whenever we spot an unusual or an exceptional car or truck for sale, or one we have for sale, we will put a blurb in our weekly Inner Circle. Also, any cars that our customers have for sale will be featured here and you can see their car with photos on our website. In this category, we will run the descriptions for two-to-three weeks and, if there is no interest in that particular vehicle, it will be deleted the following week. Any new vehicles that we add will appear first, so the oldest listing would be at the end of this section.
If any of these vehicles perk your interest, email me personally - [email protected] - for more information and photos.
TIPS AND IDEAS YOU HAVE TRIED -
If you have a tip or a discovery that you found that works on your Turbo Regal, drop us an email giving us the details so we can pass the info on to our readers. Remember, even with my knowledge, I don’t know it all. Simply email me at - [email protected]
NEW PRODUCTS FROM US -
1984-1985 BUICK TURBO REGAL
CONVERSION KIT TO A 1986-1987 TURBO REGAL IGNITION SYSTEM
This conversion kit enables you to switch a 1984-1985 ignition system to the later 1986-1987 Turbo Regal ignition system.
In most cases, the 1984-1985 Turbo Regal ignition parts are no longer available.
Kit comes complete with directions. No wires get cut. It’s an all plug-and-play conversion kit.
The metal bracket allows you to bolt the 1986-1987 coil module in place of the original 1984-1985 coil module.
NOTE - You may also be interested in these related parts - #7637 AC Delco Coil Pack and #7639 Aftermarket Ignition Module.
7722 - 1984-1985 Buick Turbo Regal Conversion Kit to a 1986-1987 Turbo Regal Ignition System.
Here is a link to the Conversion Kit on our website:
http://www.kirbanperformance.com/product/44306/CONVERSION+KIT+TO+A+1986-1987+TURBO+REGAL+IGNITION+SYSTEM+%237722.html
1984-1987 BUICK TURBO REGAL
CCCI (Computer Controlled Coil Ignition) SensorCheck MODULE
The Computer Controlled Coil Ignition (CCCI) is probably the least-understood system on your Turbo Buick powered vehicle. The most common problem is the “No-Start” condition, and there are very few tests that a car owner is capable of performing to determine a faulty component in this system.
This simple CCCI SensorCheck Module plug-and-play diagnostic tool is designed to troubleshoot your ignition system for the most common “No-Start” scenario. Specifically, it will display a simple LED to indicate the status of the CAM sensor, CRANK sensor, Coil Power and MODULE power. The CAM LED will visibly blink rapidly during idle. The CRANK LED will appear to be continuously on (due to the rapid Crank signal) when the vehicle is running normally. The POWER LED will be illuminated when the MODULE fuse is working. There are 3 LED’s assigned to each model: “HOT AIR” (1984-1985) and Intercooled (1986-1989.)
It can also be used to set the cam sensor!
No CAM signal = No Spark, No Injector pulse
No CRANK signal = No Spark, Only Inj pulse
CAM signal initiates sequential spark. Without it, No spark.
CRANK signal initiates fuel injector pulses.
No Lights, good fuses = Check ECM ground return wire.
This clever device eliminates any guesswork as to why your Turbo Regal won’t start, if it’s related to the cam sensor, crank sensor, coil pack, or coil module.
It comes with easy-to-follow directions. It is all plug-and-play to conduct the tests to determine where the problem is originating. By using LED lights, you can pinpoint where the problem originates.
By a flip of a switch, it works on all 1984 to 1987 Turbo Regals including, the 1989 Turbo Trans Am.
A must-have tool that saves the guesswork when you have a no start situation.
7723 - 1984-1987 Buick Turbo Regal –
CCCI (Computer Controlled Coil Ignition) SensorCheck Module - $129.95
Here is a link to this SensorCheck Module on our website:
http://www.kirbanperformance.com/product/44305/CCCI+%28Computer+Controlled+Coil+Ignition%29+SensorCheck+MODULE+%237723.html
1986-1987 Buick Turbo Regal -
SCANMASTER G Datalogging and Scantool in a 2-1/16″ Gauge
Turbo Regal owners have requested it, now the Scanmaster has been redesigned and formatted to fit a standard 2-1/16″ gauge. Now updated to the 21st century technology. A must have device.
SPECIFICATIONS:
- 2-1/16″ gauge mounting, black bezel, black face standard.
- 128 x 64 pixel OLED screen. Full text for data / info
- Reads ALDL streams (regular and high-speed) and PowerLogger
- Bluetooth for wireless logging to Android (phone/tablet) and PC for both PowerLogger and ALDL
- Automatic internal logging of PowerLogger and ALDL data
- View and clear diagnostic trouble codes, diagnose and tune your engine.
Comes with directions.
For more details go to - scanmaster.bailey-eng.com
NOTE - You may also be interested in these related parts - #7326 MAF Translator, #7383 Powerlogger Scan Tool, and #6383 Scanmaster 2.1 - Diagnostic Tool
An excellent scan tool.
7721 - 1986-1987 Buick Turbo Regal -
SCANMASTER G Datalogging and Scantool in a 2-1/16″ Gauge
Here is a link to this Scanmaster G on our website:
http://www.kirbanperformance.com/product/44304/SCANMASTER+G+Datalogging+and+Scantool+in+a+2+1-16+Gauge+%237721.html
1978-1988 All G-BODY (Including Buick Turbo Regals) -
FLIP-DOWN STAY-DOWN MODIFICATION KIT
TO CONVERT AN ORIGINAL REAR LICENSE PLATE BRACKET
GM used a flip-down stay-down license plate bracket on various other GM cars in the 1980s and 1990s. However, it was never a factory part on a G-body car.
If you’re like me, you hate fighting the heavy spring pressure on the factory license plate bracket when you are filling the gas tank.
The flip-down stay-down bracket has become a popular conversion to put on a G-body car, including the Turbo Regals, since it prevents accidental fuel spillage on the rear fillers. Unfortunately GM does not have any of these flip-down stay-down license plate brackets available and haven’t for years.
We have sold used ones for $25-$28 as fast as I could find them. As each year passes, finding them is getting harder and harder. The factory flip-down stay-down only used a single spring on one of the hinges.
We have designed a modification kit to convert an original rear license plate bracket to a flip-down stay-down license plate. Our new 3-piece modification kit includes 2 brackets and a spring. No holes need to be drilled in the original bracket. It eliminates the 2 factory springs on the existing license plate bracket. Those springs are prone to rust, since they are not stainless. The new spring in our kit is stainless and the 2 brackets are 24-gauge galvanized steel, so the parts will not rust.
The directions are easy-to-follow and include actual photos of the install on our personal Buick Turbo-T.
The end result - There are no rust issues with the new spring and brackets with the flip-down stay-down design along with the convenience of having your hands free to pump the gas. It also eliminates the risk of spilling fuel on the rear fillers. A bargain for under $20.
An excellent upgrade to help avoid gas spills.
7720 - 1978-1988 All G-Body (including Buick Turbo Regals) -
Flip-Down Stay-Down Modification Kit
to Convert an Original Rear License Plate Bracket - $19.95
Here is a link to this kit on our website:
http://www.kirbanperformance.com/product/44301/FLIP-DOWN+STAY-DOWN+MODIFICATION+KIT+TO+CONVERT+AN+ORIGINAL+REAR+LICENSE+PLATE+BRACKET+%237720.html
MOLLY DESIGNS -
PROTOTYPE GRAND NATIONAL 17.5 x 10 x 1/8 ACRYLIC SIGN
We have designed a collectible sign to highlight Molly’s prototype Grand National. We personally received several prototype photos from Molly years ago, and combined 2 of the photos with the tag line “PROTOTYPE GRAND NATIONAL designed by “MOLLY,” MOLLY DESIGN.”
The design is printed on 1/8 acrylic. It is printed on a machine that costs over $100,000 using a UV ink printing process is called “Direct Print.” Unfortunately, the printed sign is difficult to photograph because of reflections and light, but it looks great
It makes a great addition to your garage, office or show car display. It also makes a great gift for any Grand National enthusiast
7725 - MOLLY DESIGNS - PROTOTYPE GRAND NATIONAL 17.5 x 10 x 1/8 Acrylic sign - $24.95
“TOP TEN REASONS I OWN A BUICK GRAND NATIONAL”
17.5 x 10 x 1/8 ACRYLIC SIGN
We have designed a collectible sign to highlight the “TOP TEN REASONS I OWN A BUICK GRAND NATIONAL.”
Along with some quotes, we included our mechanic guy cartoon. Here are the top ten reasons:
# 1 - I was impressed with the factory black paint job.
# 2 - I love the constant challenge of trying to eliminate oil leaks.
# 3 - I wonder where the “power” is in the operation of the power windows.
# 4 - My wife says I needed a spending outlet for my money.
# 5 - I can buy tires wholesale.
# 6 - I was told these cars are seldom stolen.
# 7 - My joy of buying a T-Top Grand National was quickly shattered during the first rain storm.
# 8 - I wanted to learn all about the powermaster brake system.
# 9 - “B-B-B-BAD-TO-THE-BONE” sounds good on the radio.
#10 - The uninformed think it’s a Monte Carlo…the informed won’t challenge me to race.
The design is printed on 1/8 acrylic. It is printed on a machine that costs over $100,000 using a UV ink printing process is called “Direct Print.” Unfortunately, the printed sign is difficult to photograph because of reflections and light, but it looks great.
It makes a great addition to your garage, office or show car display. It also makes a great gift for any Grand National enthusiast
7726 - TOP TEN REASONS I OWN A BUICK GRAND NATIONAL”17.5 x 10 x 1/8 Acrylic sign - $24.95
Here’s a link to these 2 new signs on our website:
http://www.kirbanperformance.com/products.php?search_text=7725&submit_button=
ALWAYS LOOKING FOR IDEAS -
If you have any product ideas that would fit our Turbo Buick market that you would like to see available, email me direct [email protected]
ALWAYS IN A BUYING POSITION FOR TURBO REGAL PARTS -
Got any Turbo Buick parts you are not using? Why not cash them in for parts you need with a Letter of Credit. Simply email me a list - [email protected]. Also, we are still buying dead or partially dead 1984-1987 Turbo Regals under $4,000 that are within 250 to 350 miles of our location.
NOTE - ABOUT LINKS IN THE INNER CIRCLE -
We have heard from a couple people that have had problems with the links in our Inner Circle.
When we check the links, they work fine. However, if you are not able to be directed to the exact website page or internet site, you can "copy" and "paste" the link into the URL in your browser (such as Safari, Firefox, Internet Explorer, Google Chrome, etc.) If it doesn't link in one browser, it may work in another.
Most people having problems are using Internet Explorer… If you are having issues with links, try another browser to see if it works.
You may need to "UPDATE" your browser to be use you are using the current version.
NOTE ABOUT PHOTOS ON THE WEBSITE -
We have heard from a couple people that have viewed the photos on the website. Because these have to be low-resolution photos to work on the Inner Circle segments on the website, any photos of text don't appear clear when enlarged. This is a problem when you are trying to see numbers, such as those on the VIN labels or pages from Options booklet. Also, because of photo reproduction and computer screen variations, the colors may not be true to the actual product or photo.
If you would like to have us email you any photo at the higher resolution for viewing, just email us and we will email them to you. Be sure to be specific on which pictures you want to see - Reference Inner Circle date and photo number 1, 2, 3 or 4 - [email protected]
2016 CALENDAR OF EVENTS -
PYPES EXHAUST & MAX PERFORMANCE OPEN HOUSE CAR SHOW - June 18th, 2016 -
Held at their Headquarters, 2705 Clemens Road, Hatfield, PA 19440
This event has no rain date. Open to all American Muscle cars and trucks.
For more details, contact - [email protected]
This is a huge event that I usually attend, however, this year I can’t since it’s the same weekend as GM at Carlisle and I’m speaking both days at GM Carlisle.
GM CARLISLE - June 17th-19th, 2016
I am a guest speaker at this event both Friday at 11 am and Saturday at 9:30 am. I’ll be talking on Hurst, Hurst/Olds, and also about the door jamb VIN data decals. Seminars are always free at Carlisle.
Now that our granddaughter has a 2012 Camaro SS, she is planning on attending and showing her car. Carlisle is one of the largest swap meet facilities in the country. If you are planning on attending, bring any cores you want to cash in for a Letter of Credit. I will be able to take them. This will be the second year I been a guest speaker at Carlisle and it’s quite an honor. Over the years I have spoken at several National Pontiac and GTO conventions.
Check their website to see dates of all their upcoming 2016 events - carlisleevents.com
BCA NATIONALS - July 27th-30th, 2016
The BCA Nationals, which stands for Buick Club of America, is actually coming to Allentown, PA July 27th thru the 30th. Allentown is about 25 minutes from where we live. The big car show day is Saturday, July 30th. They expect over 1,000 Buicks of all kinds.
Sometimes we forget that our niche market has a parent national club. For more exact details and location, go to their website -www.buickclub.org/2016anniversary
GS NATIONALS - September 14th-17th, 2016 -
Beach Bend Raceway in Bowling Green, Kentucky
See the GSXtra for more details, or their website - gsnationals.com
EAST COAST BUICK REGIONALS - September 16th-17th, 2016 at Cecil County Dragway in Rising Sun, Maryland
Event includes a judged car show on Saturday open to all Buick makes and anything Buick powered. Free Vending. Saturday race classes must be Buick powered.
For more information, contact - [email protected] or [email protected]
This is not a misprint both the GS Nationals and East Coast Buick Regionals fall on the same weekend.
ABOUT OUR EMAILS -
Any inquiries concerning used parts, you must email me direct - [email protected] - I will answer you. However, if I fail to answer you within 24 hours, please email us again. Since expanding into used parts, I get a lot of emails and sometimes I may forget your request or may not remember who requested the item.
IN CLOSING -
It is less than 2 weeks away until the GM at Carlisle event. I am a speaker there both days. Hope to see you there. I will be talking on Hurst and the Hurst Olds, and also the door jamb decals. I will have a display showing all the various door jamb decals from 1969 and up. If you’re coming, we will be accepting power master cores, mass air flow sensor cores, and turbo cores. This saves you shipping costs.
RIP MUHAMMAD ALI -
Unless you live under a rock, you’ve heard that Muhammad Ali passed away late last week. His life touched so many people outside of the boxing ring that he is called one of the greatest Americans of our generation. I think this Friday most of Lousiville, Kentucky will virtually come to a standstill as he is laid to rest in the city where he was born. I remember him taking the stand on Vietnam and the draft, since that was the timeframe I was in Vietnam.
VIETNAM / 50 YEARS AGO / TURBO REGALS -
As strange as it may seem, there is actually a connection between the three topics in the above heading in my life. Ironically, I discovered this the day after Memorial Day, which is quite fitting.
As I have mentioned it before, I served one year (1966-1967) of my three-year Army stint in Nha Trang, Vietnam. I was lucky because when the plane landed in nearby Cam Ranh Bay, an officer addressed the group of us new recruits inquiring who had photography experience. Three of us raised our hands. We were tested, and I proved to be the chosen one.
Fortunately, I was a wedding photographer with my Dad at just 17 years old. Often times my Dad had two weddings on the same day, so I would cover one of the weddings by myself.
I was then sent up to Nha Trang to replace the current 17th Aviation Group photographer who had an unusual last name. His last name was Gogluicci. I remember he was from New Jersey. He had maybe one week left in Vietnam to train me, and then he was going back to the states. If I recall, he was shorter than me.
Fast forward to last Tuesday, the day after Memorial Day, I was carrying a stack of orders down to the packing area and the Turbo Regal order on top was for a Matt Gogluicci in New Jersey.
Like many Vets memories come back to you around Memorial Day and I was no exception. I called Matt Gogluicci and said, “I have an unusual question for you. Did any of your relatives with that last name serve as a photographer in Vietnam in 1966-1967 timeframe?” He said his father did and his father’s first name was Vincent.
I immediately thought this was too much of a coincidence. I had Matt give me his Dad’s phone number. Sure enough, it was Matt’s father that I replaced as a photographer for the 17th Aviation Group in Nha Trang Vietnam.
I also became the editor for the 17th Aviation Group newspaper.
It’s weird, both Vinny and I only recall one of our bosses, a young 1LT Heilderberg. The spelling of his name may be wrong.
We plan to get together later this summer. Vinny, as he was known, only has vague memories of me since going back to the States was his main concern at the time! I think he was headed for the states within 3-5 days of me arriving to replace him.
It turns out that Vinny landed the job the same way I did when he first got to Vietnam. He landed in Saigon and was also given a test. He was able to get developing equipment brought over by the Air Force, so we could develop black and white photos. In 1966-1967 in Vietnam we could not develop color prints.
Talk about a small world! Vinny is still a photographer today, which as many of you know has changed a lot from 50 years ago.
In Vietnam I used an expensive German camera called a “Rolleiflex.” Once I was given the job, my father sent me my own camera equipment, which I had used for weddings in the states. This camera shot 2-¼ inch negatives, which was larger than the standard 35mm film that most cameras used back then.
The military had a huge camera that I refused to use. I can’t remember what it was called.
I sold the Rolleiflex camera years ago. I can remember taking photos of General William Westmoreland standing maybe 10 feet away from me. At age 18, you don’t realize the history you are witnessing at the time.
I still have my short-timer’s stick from Vietnam. It was a wooden hand-carved small cane-like stick that you would carry. When they saw you with one of those sticks, other troops immediately would recognize that you were going home within a matter of weeks. I can’t recall if the short-timer’s stick was practiced all over Vietnam or just in my unit. Many of us short-timers even had it down to the number of hours before we left that dreadful country!
After serving in Vietnam, Vinny finished his Army tour in Georgia. I finished my tour at the Philadelphia Induction Center testing incoming recruits. Basically, I played teacher to incoming draftees. This was great duty as I got to drive home every night. At the time, my wife worked at Hurst.
I just took a quick glimpse on ebay and the Rolleiflex camera like I used is selling for anywhere from $1,500 to $5,000.
This story is proof that “It’s a small world after all.”
We plan to meet up with Vinny later this summer for dinner, something we never did in Vietnam!
MINT MATCHED SET OF GRAND NATIONAL WHEELS -
We recently purchased a set of mint 1986-1987 Grand National wheels from a long-time customer of ours that he removed over 15 years ago. (See Rare Parts section however, they may already be sold).
In checking the stampings on the back, two are dated 12-15-86 and two are dated 12-16-86. The owner made sure when he got the tires removed that they did it the proper way so as not to have the tire machine scratch the chrome surface. This was a common problem back when these cars were fairly new. I can recall selling many new sets of wheels to tire places that had ruined customer’s wheels and needed replacements. Back then not many cars had chrome steel wheels.
PHOTO 1 - Shows for photos of the mint, matched set of 1986-1987 Grand National wheels. It may not be readable but the date code is very visible on the back in one of the photos. Note how clean the backsides of the wheels are. I did not even have to polish the fronts, they are that nice.
POWERMASTER BRAKE SWITCHES -
As most Turbo Regal owners realize, back when the cars were fairly new, there was a Safety Recall issued by Buick for the General Electric brake switch.
From the factory they all received a black brake switch on the powermaster unit.
Soon after production, major issues developed with the brake switch possibly leaking. One might say that was the beginning of a long-running problem connected to the powermaster brake unit.
At this point, it is extremely rare that we get back a powermaster core that still has the black brake switch on it. From what I understand, a Safety Recall can basically be redeemed for free, regardless of the time limit. As long as no one has run your 17-digit VIN number at the Buick dealer and claimed the replacement grey brake switch, you should be able to get it at no charge.
I can remember doing this more than once in the early and mid-1990s on some of the Turbo Regals we bought to resell.
In April I had a customer bring me something at our Open House I had never seen before. As a NOS part it is worthless, but as a novelty item it ranks right up there as I never knew it existed in this packaging.
PHOTO 2 - The top left photo shows the original still sealed AC Delco bag that contains a brand new black brake switch, complete with a single O-ring. The top right photo taken is of the back of the bag clearly shows the black brake switch still sealed in the original AC Delco bag.
In all my years in business and with the deals I have done, I have never seen a black brake switch replacement still factory sealed in the AC Delco bag. Although its value may not be much, it’s a cool item for someone like me to have. On the left in the lower photo shows a used black brake switch that someone has loaded up with silicone, probably trying to stop a leak! On the right in the lower photo, of course, we show the correct replacement grey brake switch. That is the brake switch that should be on every powermaster unit today.
EXPLAINING THE SPID CODES (TRUNK ID LABEL) continued -
Relating to the SPID codes label, this is where all the factory installed options are listed in alphabetical order along with a list of the features that are in your Turbo Regal.
According to Chris Tobie, who worked at GM, other GM car lines started using the SPID labels prior to 1984 and they can be found on earlier F-body cars for example.
Everyone has their own preference for the number of options, whether the goal is to have as few as possible or trying to have as many as possible.
Looking back and I think many of my readers will agree they wish their Turbo Regal did not have certain options. Power windows and a power antenna can be quite problematic. The factory alarm can also cause issues. Those are just three that quickly come to my mind.
I remember when I got ours in the fall of 1987, it was a fairly well-optioned 1987 Grand National hardtop. At the time we also had a 1985 Mustang GT 5 speed with power windows. When it comes to power windows the Mustang was definitely quicker.
One of the most useful options that you can easily add to your 1984-1987 Turbo Regal today is the optional power trunk release. The SPID code for this option is “AU3” and it originally had a $50 price tag for 1984-1987. It was the same system that GM used on all the G-body cars.
For some reason GM mounted the release button on a bracket mounted in the glove box. This is a practice that GM has since discontinued. Years later they moved the button to the driver’s area. We had the actual bracket reproduced exactly. This is a very simple option to install, meaning even I have installed them in previous cars. One wire goes from the actual solenoid to one side of the button. This wire runs down the same way as the trunk light wire does. It would run down the driver’s side trunk hinge. Another wire comes off the other terminal on the back of the button and goes directly to a spot in the fuse box that has power to it when the car is turned off.
SPID codes will be continued next week.
PHOTO 3 - We show the three basic parts for the optional power trunk release. On this particular solenoid, I polished it up. It actually looks better than new.
One company that has purchased many of them from us is MIKE’S MONTES in Ohio. You can email him - [email protected] or call him at 1-800-811-5851 to purchase a power trunk release kit from him. His price is $49.95 plus shipping.
Mike is also a good source for many other Turbo Regal parts. I have known him personally for a number of years and, like most of the other G-body suppliers, we buy and sell to each other weekly. (See the Rare Parts section as the one shown in Photo 3 can be purchased directly from me).
PHOTO 4 - Shows the actual instruction sheet that came with the power trunk release kit, if you purchased it as an accessory for your car at a later date.
SEE NEW PRODUCTS SECTION -
See the New Products section for the 1984-1985 Turbo Regal conversion kit to a 1986-1987 Turbo Regal Ignition System. As many 1984-1985 owners are discovering, original 1984-1985 ignition setups are getting harder to find. Casper’s Electronics made a conversion kit that is plug-and-play and includes the bracket to secure the coil module. We now carry this complete kit.
REPRODUCTION GNX-STYLE DASH FOR SALE -
Complete pre-mounted GNX dash for sale. All of the cutting, fitting and alignment work is complete, just wire the dash and install the entire unit.
Kit Includes:
Applique with correct color indicators
Metal mounting plate
Plastic gauge bezel
Stock pre-cut cluster harness
Stock dash bezel (pre-cut with plastic gauge bezel attached)
New Stewart Warner speedometer with upper speedometer cable
New Stewart Warner tachometer
New Stewart Warner oil pressure gauge with sending unit
New Stewart Warner water temperature gauge with sending unit
New Stewart Warner fuel gauge
New Stewart Warner vacuum/ boost gauge
Plug-and-play harness
$2,250 plus shipping
This one was hand built by a good friend of ours who owns 3 Grand Nationals and has built several of these.
It comes with stock bezel already pre-cut so you do not have to cut your dash bezel. This kit eliminates any possible issues of trial and error since they have built several of these.
Buyer would have to inform us which dash is currently in the car - either digital or analog.
If interested, email me direct - [email protected] - I can provide photos.
CORES NEEDED -
Here is the information on our credits for cores.
We currently need original good 1986-1987 AC Delco mass air flow sensors. We allow $25 Letter of Credit for each correct AC Delco core.
URGENT NEED - TURBO CORES must be the 1986-1987 Turbo Regal stock ones. They must be complete. We will issue you a $100 Letter of Credit for each acceptable core.
If you ship to us, the post office is the cheapest method. Pack the item(s) with a note with your name, address and phone number
MAIL - Ship to Address -
ATTN - DENNIS
KIRBAN PERFORMANCE PRODUCTS
PO BOX 1199
PLUMSTEADSVILLE, PA 18949-1199
TECH CALLS -
If you need technical information, it’s best to email - [email protected] rather than call us.
We will do our best to answer any technical questions within 24 hours.
CAR FOR SALE - 1987 BUICK GRAND NATIONAL -
This is one with the optional factory astro-roof (CF5). It has undergone a complete frame off restoration. The seller has fully documented with photos in a binder. No expense has been spared. The owner even was able to use brand new original Pallex material. This is a top-notch example where no expense has been spared. Hundreds of hours went into the bodywork alone. All the glass and interior was totally removed. NOS GM parts were used when possible to make this car like new again. The motor was completely rebuilt and balanced. A new Limit Engineering TA 49 turbo was installed.
All new body mounts. NOS GM taillights and bezels were used along with a NOS GM grille. The bumpers were totally stripped with NOS front and rear bumper strips installed.
Here is a chance to own one completely redone and enjoy. The seller may take in partial trade another 1986-1987 Turbo Regal. The price is $39,500. This car is exactly as described, show quality from any angle, including underneath.
This Grand National is located about 20 miles from my shop. One of the best restorations you will find of a Grand National. For more info email me - [email protected]
CARS FOR SALE -
From time to time, whenever we spot an unusual or an exceptional car or truck for sale, or one we have for sale, we will put a blurb in our weekly Inner Circle. Also, any cars that our customers have for sale will be featured here and you can see their car with photos on our website. In this category, we will run the descriptions for two-to-three weeks and, if there is no interest in that particular vehicle, it will be deleted the following week. Any new vehicles that we add will appear first, so the oldest listing would be at the end of this section.
If any of these vehicles perk your interest, email me personally - [email protected] - for more information and photos.
TIPS AND IDEAS YOU HAVE TRIED -
If you have a tip or a discovery that you found that works on your Turbo Regal, drop us an email giving us the details so we can pass the info on to our readers. Remember, even with my knowledge, I don’t know it all. Simply email me at - [email protected]
NEW PRODUCTS FROM US -
1984-1985 BUICK TURBO REGAL
CONVERSION KIT TO A 1986-1987 TURBO REGAL IGNITION SYSTEM
This conversion kit enables you to switch a 1984-1985 ignition system to the later 1986-1987 Turbo Regal ignition system.
In most cases, the 1984-1985 Turbo Regal ignition parts are no longer available.
Kit comes complete with directions. No wires get cut. It’s an all plug-and-play conversion kit.
The metal bracket allows you to bolt the 1986-1987 coil module in place of the original 1984-1985 coil module.
NOTE - You may also be interested in these related parts - #7637 AC Delco Coil Pack and #7639 Aftermarket Ignition Module.
7722 - 1984-1985 Buick Turbo Regal Conversion Kit to a 1986-1987 Turbo Regal Ignition System.
Here is a link to the Conversion Kit on our website:
http://www.kirbanperformance.com/product/44306/CONVERSION+KIT+TO+A+1986-1987+TURBO+REGAL+IGNITION+SYSTEM+%237722.html
1984-1987 BUICK TURBO REGAL
CCCI (Computer Controlled Coil Ignition) SensorCheck MODULE
The Computer Controlled Coil Ignition (CCCI) is probably the least-understood system on your Turbo Buick powered vehicle. The most common problem is the “No-Start” condition, and there are very few tests that a car owner is capable of performing to determine a faulty component in this system.
This simple CCCI SensorCheck Module plug-and-play diagnostic tool is designed to troubleshoot your ignition system for the most common “No-Start” scenario. Specifically, it will display a simple LED to indicate the status of the CAM sensor, CRANK sensor, Coil Power and MODULE power. The CAM LED will visibly blink rapidly during idle. The CRANK LED will appear to be continuously on (due to the rapid Crank signal) when the vehicle is running normally. The POWER LED will be illuminated when the MODULE fuse is working. There are 3 LED’s assigned to each model: “HOT AIR” (1984-1985) and Intercooled (1986-1989.)
It can also be used to set the cam sensor!
No CAM signal = No Spark, No Injector pulse
No CRANK signal = No Spark, Only Inj pulse
CAM signal initiates sequential spark. Without it, No spark.
CRANK signal initiates fuel injector pulses.
No Lights, good fuses = Check ECM ground return wire.
This clever device eliminates any guesswork as to why your Turbo Regal won’t start, if it’s related to the cam sensor, crank sensor, coil pack, or coil module.
It comes with easy-to-follow directions. It is all plug-and-play to conduct the tests to determine where the problem is originating. By using LED lights, you can pinpoint where the problem originates.
By a flip of a switch, it works on all 1984 to 1987 Turbo Regals including, the 1989 Turbo Trans Am.
A must-have tool that saves the guesswork when you have a no start situation.
7723 - 1984-1987 Buick Turbo Regal –
CCCI (Computer Controlled Coil Ignition) SensorCheck Module - $129.95
Here is a link to this SensorCheck Module on our website:
http://www.kirbanperformance.com/product/44305/CCCI+%28Computer+Controlled+Coil+Ignition%29+SensorCheck+MODULE+%237723.html
1986-1987 Buick Turbo Regal -
SCANMASTER G Datalogging and Scantool in a 2-1/16″ Gauge
Turbo Regal owners have requested it, now the Scanmaster has been redesigned and formatted to fit a standard 2-1/16″ gauge. Now updated to the 21st century technology. A must have device.
SPECIFICATIONS:
- 2-1/16″ gauge mounting, black bezel, black face standard.
- 128 x 64 pixel OLED screen. Full text for data / info
- Reads ALDL streams (regular and high-speed) and PowerLogger
- Bluetooth for wireless logging to Android (phone/tablet) and PC for both PowerLogger and ALDL
- Automatic internal logging of PowerLogger and ALDL data
- View and clear diagnostic trouble codes, diagnose and tune your engine.
Comes with directions.
For more details go to - scanmaster.bailey-eng.com
NOTE - You may also be interested in these related parts - #7326 MAF Translator, #7383 Powerlogger Scan Tool, and #6383 Scanmaster 2.1 - Diagnostic Tool
An excellent scan tool.
7721 - 1986-1987 Buick Turbo Regal -
SCANMASTER G Datalogging and Scantool in a 2-1/16″ Gauge
Here is a link to this Scanmaster G on our website:
http://www.kirbanperformance.com/product/44304/SCANMASTER+G+Datalogging+and+Scantool+in+a+2+1-16+Gauge+%237721.html
1978-1988 All G-BODY (Including Buick Turbo Regals) -
FLIP-DOWN STAY-DOWN MODIFICATION KIT
TO CONVERT AN ORIGINAL REAR LICENSE PLATE BRACKET
GM used a flip-down stay-down license plate bracket on various other GM cars in the 1980s and 1990s. However, it was never a factory part on a G-body car.
If you’re like me, you hate fighting the heavy spring pressure on the factory license plate bracket when you are filling the gas tank.
The flip-down stay-down bracket has become a popular conversion to put on a G-body car, including the Turbo Regals, since it prevents accidental fuel spillage on the rear fillers. Unfortunately GM does not have any of these flip-down stay-down license plate brackets available and haven’t for years.
We have sold used ones for $25-$28 as fast as I could find them. As each year passes, finding them is getting harder and harder. The factory flip-down stay-down only used a single spring on one of the hinges.
We have designed a modification kit to convert an original rear license plate bracket to a flip-down stay-down license plate. Our new 3-piece modification kit includes 2 brackets and a spring. No holes need to be drilled in the original bracket. It eliminates the 2 factory springs on the existing license plate bracket. Those springs are prone to rust, since they are not stainless. The new spring in our kit is stainless and the 2 brackets are 24-gauge galvanized steel, so the parts will not rust.
The directions are easy-to-follow and include actual photos of the install on our personal Buick Turbo-T.
The end result - There are no rust issues with the new spring and brackets with the flip-down stay-down design along with the convenience of having your hands free to pump the gas. It also eliminates the risk of spilling fuel on the rear fillers. A bargain for under $20.
An excellent upgrade to help avoid gas spills.
7720 - 1978-1988 All G-Body (including Buick Turbo Regals) -
Flip-Down Stay-Down Modification Kit
to Convert an Original Rear License Plate Bracket - $19.95
Here is a link to this kit on our website:
http://www.kirbanperformance.com/product/44301/FLIP-DOWN+STAY-DOWN+MODIFICATION+KIT+TO+CONVERT+AN+ORIGINAL+REAR+LICENSE+PLATE+BRACKET+%237720.html
MOLLY DESIGNS -
PROTOTYPE GRAND NATIONAL 17.5 x 10 x 1/8 ACRYLIC SIGN
We have designed a collectible sign to highlight Molly’s prototype Grand National. We personally received several prototype photos from Molly years ago, and combined 2 of the photos with the tag line “PROTOTYPE GRAND NATIONAL designed by “MOLLY,” MOLLY DESIGN.”
The design is printed on 1/8 acrylic. It is printed on a machine that costs over $100,000 using a UV ink printing process is called “Direct Print.” Unfortunately, the printed sign is difficult to photograph because of reflections and light, but it looks great
It makes a great addition to your garage, office or show car display. It also makes a great gift for any Grand National enthusiast
7725 - MOLLY DESIGNS - PROTOTYPE GRAND NATIONAL 17.5 x 10 x 1/8 Acrylic sign - $24.95
“TOP TEN REASONS I OWN A BUICK GRAND NATIONAL”
17.5 x 10 x 1/8 ACRYLIC SIGN
We have designed a collectible sign to highlight the “TOP TEN REASONS I OWN A BUICK GRAND NATIONAL.”
Along with some quotes, we included our mechanic guy cartoon. Here are the top ten reasons:
# 1 - I was impressed with the factory black paint job.
# 2 - I love the constant challenge of trying to eliminate oil leaks.
# 3 - I wonder where the “power” is in the operation of the power windows.
# 4 - My wife says I needed a spending outlet for my money.
# 5 - I can buy tires wholesale.
# 6 - I was told these cars are seldom stolen.
# 7 - My joy of buying a T-Top Grand National was quickly shattered during the first rain storm.
# 8 - I wanted to learn all about the powermaster brake system.
# 9 - “B-B-B-BAD-TO-THE-BONE” sounds good on the radio.
#10 - The uninformed think it’s a Monte Carlo…the informed won’t challenge me to race.
The design is printed on 1/8 acrylic. It is printed on a machine that costs over $100,000 using a UV ink printing process is called “Direct Print.” Unfortunately, the printed sign is difficult to photograph because of reflections and light, but it looks great.
It makes a great addition to your garage, office or show car display. It also makes a great gift for any Grand National enthusiast
7726 - TOP TEN REASONS I OWN A BUICK GRAND NATIONAL”17.5 x 10 x 1/8 Acrylic sign - $24.95
Here’s a link to these 2 new signs on our website:
http://www.kirbanperformance.com/products.php?search_text=7725&submit_button=
ALWAYS LOOKING FOR IDEAS -
If you have any product ideas that would fit our Turbo Buick market that you would like to see available, email me direct [email protected]
ALWAYS IN A BUYING POSITION FOR TURBO REGAL PARTS -
Got any Turbo Buick parts you are not using? Why not cash them in for parts you need with a Letter of Credit. Simply email me a list - [email protected]. Also, we are still buying dead or partially dead 1984-1987 Turbo Regals under $4,000 that are within 250 to 350 miles of our location.
NOTE - ABOUT LINKS IN THE INNER CIRCLE -
We have heard from a couple people that have had problems with the links in our Inner Circle.
When we check the links, they work fine. However, if you are not able to be directed to the exact website page or internet site, you can "copy" and "paste" the link into the URL in your browser (such as Safari, Firefox, Internet Explorer, Google Chrome, etc.) If it doesn't link in one browser, it may work in another.
Most people having problems are using Internet Explorer… If you are having issues with links, try another browser to see if it works.
You may need to "UPDATE" your browser to be use you are using the current version.
NOTE ABOUT PHOTOS ON THE WEBSITE -
We have heard from a couple people that have viewed the photos on the website. Because these have to be low-resolution photos to work on the Inner Circle segments on the website, any photos of text don't appear clear when enlarged. This is a problem when you are trying to see numbers, such as those on the VIN labels or pages from Options booklet. Also, because of photo reproduction and computer screen variations, the colors may not be true to the actual product or photo.
If you would like to have us email you any photo at the higher resolution for viewing, just email us and we will email them to you. Be sure to be specific on which pictures you want to see - Reference Inner Circle date and photo number 1, 2, 3 or 4 - [email protected]
2016 CALENDAR OF EVENTS -
PYPES EXHAUST & MAX PERFORMANCE OPEN HOUSE CAR SHOW - June 18th, 2016 -
Held at their Headquarters, 2705 Clemens Road, Hatfield, PA 19440
This event has no rain date. Open to all American Muscle cars and trucks.
For more details, contact - [email protected]
This is a huge event that I usually attend, however, this year I can’t since it’s the same weekend as GM at Carlisle and I’m speaking both days at GM Carlisle.
GM CARLISLE - June 17th-19th, 2016
I am a guest speaker at this event both Friday at 11 am and Saturday at 9:30 am. I’ll be talking on Hurst, Hurst/Olds, and also about the door jamb VIN data decals. Seminars are always free at Carlisle.
Now that our granddaughter has a 2012 Camaro SS, she is planning on attending and showing her car. Carlisle is one of the largest swap meet facilities in the country. If you are planning on attending, bring any cores you want to cash in for a Letter of Credit. I will be able to take them. This will be the second year I been a guest speaker at Carlisle and it’s quite an honor. Over the years I have spoken at several National Pontiac and GTO conventions.
Check their website to see dates of all their upcoming 2016 events - carlisleevents.com
BCA NATIONALS - July 27th-30th, 2016
The BCA Nationals, which stands for Buick Club of America, is actually coming to Allentown, PA July 27th thru the 30th. Allentown is about 25 minutes from where we live. The big car show day is Saturday, July 30th. They expect over 1,000 Buicks of all kinds.
Sometimes we forget that our niche market has a parent national club. For more exact details and location, go to their website -www.buickclub.org/2016anniversary
GS NATIONALS - September 14th-17th, 2016 -
Beach Bend Raceway in Bowling Green, Kentucky
See the GSXtra for more details, or their website - gsnationals.com
EAST COAST BUICK REGIONALS - September 16th-17th, 2016 at Cecil County Dragway in Rising Sun, Maryland
Event includes a judged car show on Saturday open to all Buick makes and anything Buick powered. Free Vending. Saturday race classes must be Buick powered.
For more information, contact - [email protected] or [email protected]
This is not a misprint both the GS Nationals and East Coast Buick Regionals fall on the same weekend.
ABOUT OUR EMAILS -
Any inquiries concerning used parts, you must email me direct - [email protected] - I will answer you. However, if I fail to answer you within 24 hours, please email us again. Since expanding into used parts, I get a lot of emails and sometimes I may forget your request or may not remember who requested the item.
IN CLOSING -
It is less than 2 weeks away until the GM at Carlisle event. I am a speaker there both days. Hope to see you there. I will be talking on Hurst and the Hurst Olds, and also the door jamb decals. I will have a display showing all the various door jamb decals from 1969 and up. If you’re coming, we will be accepting power master cores, mass air flow sensor cores, and turbo cores. This saves you shipping costs.