1986-1987 Buick Turbo Regal -
ALKY ALCOHOL INJECTION SYSTEM
This Alky alcohol injection system has been available for many years. It is by far the best method to increase boost levels using 91 octane fuel without the worry of detonation (destroying the engine).
This AC-109 kit includes everything you need to do an install on a 1986-1987 Turbo Regal, as seen in these photos.
It is helpful if you already have installed a knock gauge to monitor knock readings, a fuel pressure gauge to monitor fuel pressure, and a boost gauge to assist in setting up this system for activation.
The kit includes a heavy-duty pump featuring over 100-plus PSI to insure flow in any conditions. The unit will not rust.
Kit also includes a brand new OEM-style 3 bar MAP (manifold air pressure) sensor (stock is a 2 bar), an original OEM coolant overflow bottle that installs in the stock location, a pressure line filter which prevents contaminants from clogging the nozzle assembly. The high-flow nozzle delivers atomized volume at the highest pressures. The small dash mounted controller makes it almost undetectable in your car.
All the wiring is heavy duty with shielding to prevent any kind of interference with vehicles electronics. Wire loom is included so the installation looks factory once completed.
All the parts are designed to last and is a proven product among 1986-1987 Turbo Regal owners.
This kit gives you peace of mind that enables you to run high levels of boost without the fear of detonation.
This is a progressive system design once again for 100% methanol. We can not stress enough the gains you get by going with a kit that's built to hold up to 100%.
The actual heavy-duty pump has a manufacturer's one-year warranty. All the other electronic components have a two-year warranty.
PRE-INSTALL CHECK LIST - Make sure the engine is in tune with no abnormalities. Abnormalities could mean it has a rod knock, spewing oil out of the breathers, or blowing steam out of the exhaust. Next, make sure there are no drivability issues; i.e. stumbles, runs rough or black smoke out the exhaust.
A great way to eliminate detonation with higher boost levels.
When purchasing this item you may also want to consider part #7502.
1986-1987 Buick Turbo Regal -
ALKY ALCOHOL INJECTION SYSTEM
This Alky alcohol injection system has been available for many years. It is by far the best method to increase boost levels using 91 octane fuel without the worry of detonation (destroying the engine).
This AC-109 kit includes everything you need to do an install on a 1986-1987 Turbo Regal, as seen in these photos.
It is helpful if you already have installed a knock gauge to monitor knock readings, a fuel pressure gauge to monitor fuel pressure, and a boost gauge to assist in setting up this system for activation.
The kit includes a heavy-duty pump featuring over 100-plus PSI to insure flow in any conditions. The unit will not rust.
Kit also includes a brand new OEM-style 3 bar MAP (manifold air pressure) sensor (stock is a 2 bar), an original OEM coolant overflow bottle that installs in the stock location, a pressure line filter which prevents contaminants from clogging the nozzle assembly. The high-flow nozzle delivers atomized volume at the highest pressures. The small dash mounted controller makes it almost undetectable in your car.
All the wiring is heavy duty with shielding to prevent any kind of interference with vehicles electronics. Wire loom is included so the installation looks factory once completed.
All the parts are designed to last and is a proven product among 1986-1987 Turbo Regal owners.
This kit gives you peace of mind that enables you to run high levels of boost without the fear of detonation.
This is a progressive system design once again for 100% methanol. We can not stress enough the gains you get by going with a kit that's built to hold up to 100%.
The actual heavy-duty pump has a manufacturer's one-year warranty. All the other electronic components have a two-year warranty.
PRE-INSTALL CHECK LIST - Make sure the engine is in tune with no abnormalities. Abnormalities could mean it has a rod knock, spewing oil out of the breathers, or blowing steam out of the exhaust. Next, make sure there are no drivability issues; i.e. stumbles, runs rough or black smoke out the exhaust.
A great way to eliminate detonation with higher boost levels.
When purchasing this item you may also want to consider part #7502.
