1986-1988 G-Body All Models (including Buick Turbo Regal) - THIRD BRAKE LIGHT LED PANEL Many cars produced today have the LED format for their various lights. LED lighting offers several benefits. Besides projecting a brighter and wider light, LEDs draw a lot less amperage and hardly generates any heat compared to the glass-style bulbs. The stock bulb in the third brake light is a #1156 bulb. If that bulb were to stay on for two minutes, it would reach over 200 degrees. This can burn the socket housing and, in severe cases, distort the top of the brake light housing. In contrast, the LED panel would only reach 130 degrees after TWO HOURS. We now offer a LED panel for the original third brake light used in all the 1986-1988 G-Body cars. Each panel is custom built and assembled in the U.S.A. and has a Limited Lifetime Warranty. This custom-made panel contains three rows of fifteen each for a total of 45 of the SuperFlux LEDs. The SuperFlux LEDs are a brighter LED over some of the other available LEDs. Each panel is coated on the back to seal and protect the circuits from any moisture or unintended shorts by tools or careless installation. Each panel is then tested before delivery. Each LED panel has integrated voltage regulating circuitry built into the base of the socket for space saving. This limits the amount of voltage going to the LED panel. This helps insure that the LED panel will last anywhere from 10,000 to 100,000 hours. The LED panel is powered up through the factory socket. No wires get cut and no modifications are needed to the third brake light housing in your car. LED Panel comes with easy-to-follow directions. An excellent upgrade to improve the lighting in the third brake light. 7660 - 1986-1988 G-Body All Models (including Buick Turbo Regal) - Third Brake Light LED Panel
Add a Brake Light Insert of your choosing for an additional $32! Various options to choose from
1986-1988 G-Body All Models (including Buick Turbo Regal) - THIRD BRAKE LIGHT LED PANEL Many cars produced today have the LED format for their various lights. LED lighting offers several benefits. Besides projecting a brighter and wider light, LEDs draw a lot less amperage and hardly generates any heat compared to the glass-style bulbs. The stock bulb in the third brake light is a #1156 bulb. If that bulb were to stay on for two minutes, it would reach over 200 degrees. This can burn the socket housing and, in severe cases, distort the top of the brake light housing. In contrast, the LED panel would only reach 130 degrees after TWO HOURS. We now offer a LED panel for the original third brake light used in all the 1986-1988 G-Body cars. Each panel is custom built and assembled in the U.S.A. and has a Limited Lifetime Warranty. This custom-made panel contains three rows of fifteen each for a total of 45 of the SuperFlux LEDs. The SuperFlux LEDs are a brighter LED over some of the other available LEDs. Each panel is coated on the back to seal and protect the circuits from any moisture or unintended shorts by tools or careless installation. Each panel is then tested before delivery. Each LED panel has integrated voltage regulating circuitry built into the base of the socket for space saving. This limits the amount of voltage going to the LED panel. This helps insure that the LED panel will last anywhere from 10,000 to 100,000 hours. The LED panel is powered up through the factory socket. No wires get cut and no modifications are needed to the third brake light housing in your car. LED Panel comes with easy-to-follow directions. An excellent upgrade to improve the lighting in the third brake light. 7660 - 1986-1988 G-Body All Models (including Buick Turbo Regal) - Third Brake Light LED Panel
Add a Brake Light Insert of your choosing for an additional $32! Various options to choose from
